Saturday, 17 November 2018

Pressed block automatic loader with single clamp (CATP)

Automatic loader for the collection of pressed wood blocks, in rows about 1200mm long, from pallets placed on the ground with a maximum height of 1830mm and for the deposit on the existing conveyor belt, in three feeding channels at a distance of approximately 350/400mm. Falda collection sucker assembly interposed between the floors, and deposit on the shelf on the side. Steel structure with single sliding beam. Sliding trolley with tubular upright that slides on polyurethane wheels. Sliding movement via toothed belt. Lifting movement via chain. X/Z axes drive motors with gearbox and self-breaking motors controller by inverters.


2014-05-08_14.41.46_-_Copia

TECHNICAL DATA

  • CE protections
  • Voltage 400V. 50 Hz. 3 phase + earth + separate neutral
  • Product = pressed blocks for the production of pallets
  • Size of blocks = 70 x 70 – 75 x 75 – 75 x 95 – 95 x 95 – 100 x 100 100 x 145 – 145 x 145 – height 75mm WITH OPTIONAL
  • Size of pallets = 800 x 1200 – 1000 x 1200
  • Maximum height of pallet to be disassembled = 1850mm
  • Opening of clamp = max.1300 (with stroke 200mm). Fully closed 1100mm (variable)
  • Production speed = 5 pallets per minute
  • The company reserves the right to change technical specifications and construction methods without notice. In some pictures, due to photographic reasons, there are not some of the safety devices.

SHARE

You can share this on the main social network.

AUXILIARY MACHINES

Stamping machine (TIM 4/6)

Using the thermic stamping machine the operator can brand the pallets. Equipped with 4 or 6 customizable branding heads in bronze.

Angle cutting machine (TGAN)

This auxiliary equipment allows the machine to smoothen the angles of the pallet by means of a cutting sequence at an angle of 45°.

Pallet Tilter of 90° (GP90)

Auxiliary machinery in tubular steel structure which allows the machine to rotate the pallets by 90°to prepare them for the following processing operations and to ensure proper stacking.

Vicetype pallet tilter (GPIN)

The machine allows the operator to tilt the pallet on itself through a piece of equipment that incorporates a vice run by pneumatic cylinders.

Alternating pallet tilter (GPT)

By means of a tilter with rotary belt and steel structure, the pallet is rotated by 180°. It is also configured to perform the transfert function.

Milling machine with 6 cutters from the top (SMTA)

Chamfering unit for in-line deck boards in tubular structure with cutting depth adjuster. Equipped with 6 cutters from the top (for CHT).

Milling machine 6 heads from the bottom (SMTB)

Chamfering unit for in-line deck boards with tubular steel structure and cutting depth adjuster. Equipped with six cutter from the bottom (for CHA).

Automatic blocks feeder (CAT)

Automatic feeder that allows the machine to load blocks that are already cut in the nailing machine without the need for the operator to intervene.

Double tweezers (DP)

An optional equipment of the block-cutting machine that allows the operator to double the productive capacity while maintaining cutting precision and speed.

(IMP)

Lateral transfert (TLT)

Accessory that enables the automated lateral movement of the pallets by means of an alignment barrier.

Motorized Belt Conveyor (MAG6)

The terminal part of the stacking unit, the warehouse allows the operator to unload the processed pallets. It is equipped with a photocell to the stop the machine when the warehouse is full.

Automatic unloading device (DD500)

Assembled on a mobile counter, thanks to a pneumatic cylinder, the device adjusts the automatic scrapping of the head and tail of the joist.

INFORMATION and ASSISTANCE

Contact us for more information about our products!