SECOND-HAND NAILING LINE MODEL CHA - WITH STACKING UNIT

Second-hand nailing line model CHA, composed of:

- CHA alternated-chariot nailing machine, for production of special pallets with maximum dimensions of 2200 mm (width) and 2500 mm (length)

Manufactured in 2007

- Stacking machine with interlocking - manufactured in 2000

You can share this on the main social network.

MAIN MACHINES

AUXILIARY MACHINES

Stamping machine (TIM 4/6)

Using the thermic stamping machine the operator can brand the pallets. Equipped with 4 or 6 customizable branding heads in bronze.

Angle cutting machine (TGAN)

This auxiliary equipment allows the machine to smoothen the angles of the pallet by means of a cutting sequence at an angle of 45°.

Pallet Tilter of 90° (GP90)

Auxiliary machinery in tubular steel structure which allows the machine to rotate the pallets by 90°to prepare them for the following processing operations and to ensure proper stacking.

Vicetype pallet tilter (GPIN)

The machine allows the operator to tilt the pallet on itself through a piece of equipment that incorporates a vice run by pneumatic cylinders.

Alternating pallet tilter (GPT)

By means of a tilter with rotary belt and steel structure, the pallet is rotated by 180°. It is also configured to perform the transfert function.

Milling machine with 6 cutters from the top (SMTA)

Chamfering unit for in-line deck boards in tubular structure with cutting depth adjuster. Equipped with 6 cutters from the top (for CHT).

Milling machine 6 heads from the bottom (SMTB)

Chamfering unit for in-line deck boards with tubular steel structure and cutting depth adjuster. Equipped with six cutter from the bottom (for CHA).

Automatic blocks feeder (CAT)

Automatic feeder that allows the machine to load blocks that are already cut in the nailing machine without the need for the operator to intervene.

Double tweezers (DP)

An optional equipment of the block-cutting machine that allows the operator to double the productive capacity while maintaining cutting precision and speed.

(IMP)

Lateral transfert (TLT)

Accessory that enables the automated lateral movement of the pallets by means of an alignment barrier.

Motorized Belt Conveyor (MAG6)

The terminal part of the stacking unit, the warehouse allows the operator to unload the processed pallets. It is equipped with a photocell to the stop the machine when the warehouse is full.

Automatic unloading device (DD500)

Assembled on a mobile counter, thanks to a pneumatic cylinder, the device adjusts the automatic scrapping of the head and tail of the joist.

SECOND-HAND NAILING LINE MODEL CHA - WITH STACKING UNIT

SHARE

MAIN MACHINES

Robotics (ROBOT)

Hydraulic nailing machine X-Master (X-Master)

Hydraulic nailing machine ALL-IN-1 (ALL-IN-1)

Hydraulic nailing machine Master (Master)

Hydraulic nailing machine on alternating chariot (CHA)

Hydraulic nailing machine with belt (CHT)

Nailing Line

Automatic Pack Cutting Machine (TPA120)

Automatic block cutting machine (TTA550)

Pressed block automatic loader with single clamp (CATP)